Veritas NetBackup™ Appliance SNMP Trap Reference Guide
- Overview
- SNMP hardware traps
- vrtsadapterTrap
- vrtsbbuTrap
- vrtsconnectionTrap
- vrtscpuTrap
- vrtsdiskTrap
- vrtsfanTrap
- vrtsfirmwareTrap
- vrtsnetworkcardTrap
- vrtspartitionTrap
- vrtspowerTrap
- vrtsraidgroupTrap
- vrtsstoragestatusTrap
- vrtssystemName
- vrtstemperatureTrap
- vrtsvolumeTrap
- vrtsenclosurediskTrap
- vrtsenclosurefanTrap
- vrtsenclosurepowerTrap
- vrtsenclosuretemperatureTrap
- vrtsdimmTrap
- vrtsiscsiTrap
- vrtsethernetTrap
- Appendix A. Management Information Base (MIB) file contents
vrtspartitionTrap
OID: 1.3.6.1.4.1.48328.3.9.1.21
The vrtspartitionTrap monitors the status of the appliance storage partitions. If you receive an alert, it means that the partition's disk usage is too high, or it has experienced an error.
Check the SNMP trap or the email alert that you received for additional information to help you determine the exact issue that occurred. You can also check the Monitor > Hardware page of the Web Console of your appliance.
Based on the information from the SNMP trap and the email alert, take one of the following actions:
Table: Next steps for the vrtspartitionTrap
What happened | What to do now |
|---|---|
The partition usage has exceeded critical threshold: full capacity imminent. | Cleanup the partition and re-check status. If the issue is not resolved, contact Veritas Support for assistance. |
The partition usage has exceeded warning threshold and will soon reach full capacity. | Cleanup the partition and re-check status. If the issue is not resolved, contact Veritas Support for assistance. |
The partition is degraded. | Check if there are any disk errors or a power supply interruption to one or more storage shelves. If the issue persists, contact Veritas Support for assistance. |
The partition is not accessible. | Check if there are any disk errors or a power supply interruption to one or more storage shelves. If the issue persists, contact Veritas Support for assistance. |