Veritas NetBackup™ Appliance SNMP Trap Reference Guide
- Overview
- SNMP hardware traps
- vrtsadapterTrap
- vrtsbbuTrap
- vrtsconnectionTrap
- vrtscpuTrap
- vrtsdiskTrap
- vrtsfanTrap
- vrtsfirmwareTrap
- vrtsnetworkcardTrap
- vrtspartitionTrap
- vrtspowerTrap
- vrtsraidgroupTrap
- vrtsstoragestatusTrap
- vrtssystemName
- vrtstemperatureTrap
- vrtsvolumeTrap
- vrtsenclosurediskTrap
- vrtsenclosurefanTrap
- vrtsenclosurepowerTrap
- vrtsenclosuretemperatureTrap
- vrtsdimmTrap
- vrtsiscsiTrap
- vrtsethernetTrap
- Appendix A. Management Information Base (MIB) file contents
vrtsdimmTrap
OID: 1.3.6.1.4.1.48328.3.9.1.23
The vrtsdimmTrap monitors the status of the DIMM (Dual In-line Memory Module). If you receive an alert, it means that one of the DIMM's is not in an optimal state or may not have been in an optimal state previously.
Check the SNMP trap or the email alert that you received for additional information to help you determine the exact issue that occurred. You can also check the Monitor > Hardware page of the web console.
Check the SNMP trap or the email alert that you received for additional information to help you determine the exact issue that occurred. (for e.g Slot ID, Uncorrectable error count). You can also check the Monitor > Hardware ShowHealth Appliance DIMM command of the shell menu.
Based on the information from the SNMP trap, the email alert, or the Monitor> Hardware ShowHealth Appliance DIMM command, take the following actions:
Table: Next steps for the vrtsdimmTrap
What happened | What to do now |
|---|---|
The DIMM Status is Failed, the DIMM has encountered an uncorrectable error and needs to be replaced. | Contact Veritas Support to replace the DIMM. |