Veritas™ Appliance AutoSupport Reference Guide

Last Published:
Product(s): Appliances (Version Not Specified)
Platform: Veritas 5340,Veritas 5260,Veritas 5250,Veritas 5150,Veritas 5350,Veritas 5330,Veritas 5240,Veritas 5360,Veritas 3340,Veritas 3350,Veritas 3360

Setting up SNMP alerts

You can configure the appliance to generate and send Simple Network Management Protocol (SNMP) traps to your SNMP server to monitor the hardware.

To configure the SNMP settings:

  1. Cluster dashboardUse any one of the following options to log in using the user account that you created:

    • Use a user account with both Appliance Administrator and Administrator role, or a user account with only an Appliance administrator role to log in to the NetBackup Flex Scale web interface https://ManagementServerIPorFQDN/webui where ManagementServerIPorFQDN is the public IP address, the FQDN, or the short host name that you specified for the NetBackup Flex Scale management server and API gateway during the cluster configuration, and then in the left pane click Cluster Management > Cluster settings > AutoSupport.

    • Use a user account with an Appliance Administrator role to log in to the NetBackup Flex Scale infrastructure management console https://ManagementServerIPorFQDN:14161 where ManagementServerIPorFQDN is the public IP address, the FQDN, or the short host name that you specified for the NetBackup Flex Scale management server and API gateway during the cluster configuration, and then in the left pane click Settings > AutoSupport.

      Note:

      If you access the NetBackup Flex Scale infrastructure management console by using the short host name from a node, set the DNS settings (name server, domain name, and search domain) or ensure that the entry for mapping the short host name to an IP address exists in the hosts file of the node.

  2. Click Save.

    A notification is displayed. To view the status and progress of each of the tasks, click View details.

    The MIB file is located in the /opt/autosupport/VERITAS-APPLIANCE-MONITORING.mib location on a NetBackup Flex Scale node. After configuring SNMP successfully, copy the MIB file from the /opt/autosupport/VERITAS-APPLIANCE-MONITORING.mib location to your SNMP manager to receive SNMP traps. SNMP traps can only be send out to the configured destination, inbound SNMP queries and walks are not possible as there is no SNMP service on the NetBackup Flex Scale nodes.