Veritas 5340 Appliance Product Description
- About the Veritas 5340 Appliance
- About the Veritas 5340 Appliance
- Features and components of the appliance
- Locating the appliance serial number
- Compute node disk drive configurations
- About the compute node front panel USB port
- About the compute node control panel
- About the compute node rear panel
- About the Veritas 5U84 Storage Shelves
- About Veritas 5340 Appliance storage shelves
- About the 5U84 Primary Storage Shelf and 5U84 Expansion Storage Shelf rear components
- Veritas 5340 Appliance and 5U84 Storage Shelf cables
- Appendix A. Technical specifications, Environmental/Protocol standards, and Compliance standards
- 5340 Appliance compute node technical specifications
- Veritas 5U84 Storage Shelf technical specifications
- Environmental specifications
- Protocol standards
- Regulatory, compliance, and certification information
- Index
About the compute node disk drive LEDs
Each 5340 Appliance compute node disk drive module contains two LEDs on the left side of each module.
The LED Status descriptions are described in the following table.
Table: 5340 Appliance compute node disk drive LED Status descriptions
Number | Description | LED behavior | Condition |
|---|---|---|---|
1 | Amber Status LED | Off | No disk drive access and no disk drive faults |
Solid amber | A disk drive fault has occurred | ||
Blinking amber | A RAID rebuild is in progress (1Hz blink) Locating / identifying the disk drive (4Hz blink) | ||
2 | Green Activity LED | Off | Power on - the disk drive has spun down |
Solid green | Power on - no disk drive activity | ||
Blinking green | Power on - the disk drive is processing a command or Power on - the disk drive is spinning up | ||
Note:
Disk drive modules that do not contain disk drives also have LEDs. Although there may not be disk drive activity, some colored lights may still be seen through the disk modules.