Veritas 5340 Appliance Product Description

Last Published:
Product(s): Appliances (Version Not Specified)
Platform: Veritas 5340
  1. About the Veritas 5340 Appliance
    1.  
      About the Veritas 5340 Appliance
    2.  
      Features and components of the appliance
    3.  
      Locating the appliance serial number
    4. Compute node disk drive configurations
      1.  
        About the compute node disk drive LEDs
    5.  
      About the compute node front panel USB port
    6. About the compute node control panel
      1.  
        About the System Status LED states
      2.  
        About the Power button LED states
    7. About the compute node rear panel
      1.  
        Available NetBackup 5340 Appliance PCIe-based I/O configurations
      2. Total 5340 Appliance on-board and PCIe-based I/O ports
        1.  
          QLE2692 dual-port 16Gb Fibre Channel host bus adapter
        2.  
          QLE8442 dual-port 10Gb Ethernet/iSCSI capable card with SFP+ modules
        3.  
          QLE2562 dual-port 8Gb Fibre Channel host bus adapter with SFP+ modules
      3.  
        Appliance network interface card port assignments
  2. About the Veritas 5U84 Storage Shelves
    1. About Veritas 5340 Appliance storage shelves
      1.  
        Available appliance storage options
      2. About the Veritas 5U84 Storage Shelf disk drive drawers
        1.  
          Disk drive slot numbering
        2.  
          Disk Drive In Carrier (DDIC) modules
        3.  
          Disk Drive Drawer printed circuit board (PCB) assemblies
        4.  
          Drawer Sideplane Status panels
        5.  
          Drawer Sideplane hot swap LED indicators
      3.  
        5U84 Primary Storage Shelf and the 5U84 Expansion Storage Shelf control panel
    2. About the 5U84 Primary Storage Shelf and 5U84 Expansion Storage Shelf rear components
      1.  
        Veritas 5U84 Primary Storage Shelf RAID controllers
      2. Veritas 5U84 Expansion Storage Shelf Expansion I/O modules
        1.  
          Expansion I/O module Status LED location and conditions
        2.  
          Expansion I/O module SAS Activity LED location and conditions
      3.  
        Veritas 5U84 Storage Shelf cooling modules
      4.  
        5U84 Storage Shelf Power Supply Units
  3. Veritas 5340 Appliance and 5U84 Storage Shelf cables
    1.  
      Power cables
    2.  
      Network cable
    3.  
      Multi-mode fiber optic cable
    4.  
      SAS-3 cable
    5.  
      Twinaxial copper cables
  4. Appendix A. Technical specifications, Environmental/Protocol standards, and Compliance standards
    1.  
      5340 Appliance compute node technical specifications
    2.  
      Veritas 5U84 Storage Shelf technical specifications
    3.  
      Environmental specifications
    4.  
      Protocol standards
    5. Regulatory, compliance, and certification information
      1.  
        Product regulatory compliance
      2.  
        Product safety compliance
      3.  
        Product EMC Compliance - Class A Compliance
      4.  
        Product ecology compliance
      5.  
        Certifications / Registrations / Declarations
      6. Electromagnetic compatibility notices
        1.  
          FCC Verification Statement (USA)
        2.  
          ICES-003 (Canada)
        3.  
          CE Declaration of Conformity (Europe)
        4.  
          VCCI (Japan)
        5.  
          BSMI (Taiwan)
  5.  
    Index

About the compute node control panel

The 5340 Appliance compute node includes a control panel on the right side of the front panel. System information is shown on this control panel.

Figure: Control panel

Control panelCompute nodecontrol panelControl panelcompute nodesystem LED descriptionsControl panelcompute node

Table: Control panel system LED descriptions

Label

LED

System information

A

Power button with integrated LED

The Power button toggles the system on and off.

See About the Power button LED states.

B

Hard Drive Activity LED

The drive activity LED on the front panel indicates drive activity from the on-board hard disk controllers.

C

System ID button with integrated LED

The System ID button toggles the integrated ID LED and the blue server board LED on and off.

The system ID LED identifies the system for maintenance when it is racked with similar server systems.

D

Network Activity LEDs

The front control panel includes four activity LED indicators for each on-board network interface controller (NIC).

  • NIC-1 represents network interface controller 1

  • NIC-2 represents network interface controller 2

  • NIC-3 represents network interface controller 3

  • NIC-4 represents network interface controller 4

When network links are detected on the controllers, the LEDs are activated and remain on. The LEDs blink when network activity occurs, and the rate at which they blink is determined by the amount of network activity that occurs.

E

NMI button (recessed, tool required for use)

When it is depressed, the NMI button puts the appliance in a halt state, issues a non-maskable interrupt (NMI), and then triggers the non-maskable interrupt. All server data can be lost.

Veritas recommends that you do not enable NMI by pressing the NMI button.

F

System Cold Reset Button (recessed, tool required for use on non-storage models)

When depressed, the System Cold Reset button re-boots and re-initializes the appliance.

G

System Status LED

The System Status LED is bi-color indicator that uses the colors green and amber to display the current health of the appliance.

Two locations are provided for you to monitor the health of the system. You can find the first location on the front control panel, while the second location is located on the back edge of the server board. It is viewable from the rear of the appliance. Both LEDs show the same state of health.

See About the System Status LED states.