Veritas 5340 Appliance Product Description

Last Published:
Product(s): Appliances (Version Not Specified)
Platform: Veritas 5340
  1. About the Veritas 5340 Appliance
    1.  
      About the Veritas 5340 Appliance
    2.  
      Features and components of the appliance
    3.  
      Locating the appliance serial number
    4. Compute node disk drive configurations
      1.  
        About the compute node disk drive LEDs
    5.  
      About the compute node front panel USB port
    6. About the compute node control panel
      1.  
        About the System Status LED states
      2.  
        About the Power button LED states
    7. About the compute node rear panel
      1.  
        Available NetBackup 5340 Appliance PCIe-based I/O configurations
      2. Total 5340 Appliance on-board and PCIe-based I/O ports
        1.  
          QLE2692 dual-port 16Gb Fibre Channel host bus adapter
        2.  
          QLE8442 dual-port 10Gb Ethernet/iSCSI capable card with SFP+ modules
        3.  
          QLE2562 dual-port 8Gb Fibre Channel host bus adapter with SFP+ modules
      3.  
        Appliance network interface card port assignments
  2. About the Veritas 5U84 Storage Shelves
    1. About Veritas 5340 Appliance storage shelves
      1.  
        Available appliance storage options
      2. About the Veritas 5U84 Storage Shelf disk drive drawers
        1.  
          Disk drive slot numbering
        2.  
          Disk Drive In Carrier (DDIC) modules
        3.  
          Disk Drive Drawer printed circuit board (PCB) assemblies
        4.  
          Drawer Sideplane Status panels
        5.  
          Drawer Sideplane hot swap LED indicators
      3.  
        5U84 Primary Storage Shelf and the 5U84 Expansion Storage Shelf control panel
    2. About the 5U84 Primary Storage Shelf and 5U84 Expansion Storage Shelf rear components
      1.  
        Veritas 5U84 Primary Storage Shelf RAID controllers
      2. Veritas 5U84 Expansion Storage Shelf Expansion I/O modules
        1.  
          Expansion I/O module Status LED location and conditions
        2.  
          Expansion I/O module SAS Activity LED location and conditions
      3.  
        Veritas 5U84 Storage Shelf cooling modules
      4.  
        5U84 Storage Shelf Power Supply Units
  3. Veritas 5340 Appliance and 5U84 Storage Shelf cables
    1.  
      Power cables
    2.  
      Network cable
    3.  
      Multi-mode fiber optic cable
    4.  
      SAS-3 cable
    5.  
      Twinaxial copper cables
  4. Appendix A. Technical specifications, Environmental/Protocol standards, and Compliance standards
    1.  
      5340 Appliance compute node technical specifications
    2.  
      Veritas 5U84 Storage Shelf technical specifications
    3.  
      Environmental specifications
    4.  
      Protocol standards
    5. Regulatory, compliance, and certification information
      1.  
        Product regulatory compliance
      2.  
        Product safety compliance
      3.  
        Product EMC Compliance - Class A Compliance
      4.  
        Product ecology compliance
      5.  
        Certifications / Registrations / Declarations
      6. Electromagnetic compatibility notices
        1.  
          FCC Verification Statement (USA)
        2.  
          ICES-003 (Canada)
        3.  
          CE Declaration of Conformity (Europe)
        4.  
          VCCI (Japan)
        5.  
          BSMI (Taiwan)
  5.  
    Index

Appliance network interface card port assignments

The following section describes the on-board 1Gb network interface card (NIC) port and Ethernet (eth) port assignments. It also describes the PCIe-based 10Gb NIC port and Ethernet port assignments for each 5340 Appliance.

Figure: NetBackup &aModel; Appliance compute node Ethernet port assignments

NetBackup &aModel; Appliance compute node Ethernet port assignments

Figure: Flex &aModel; Appliance compute node NIC port assignments

Flex &aModel; Appliance compute node NIC port assignments

Table: Appliance compute node network interface port information

Port

Function

eth0/NIC1/host1

(copper/RJ45 connector)

  • NetBackup Appliance (eth0/NIC1):

    Used for the initial configuration of the appliance. After completing the initial configuration, you can connect NIC1 (eth0) to an administrative network that does not provide any backup data transfer. For more information, see the NetBackup™ 53xx Appliance Initial Configuration Guide.

    Note:

    Veritas does not support forming a NIC bond using eth0/NIC1 with other eth/NIC ports.

  • Flex Appliance (host1):

    A 1-GbE port copper connector that you can connect to an administrative network to manage the 5340 Appliance system. It is bonded with host0 during initial configuration as bond mgmt0.

eth1/NIC2/host0

(copper/RJ45 connector)

  • NetBackup Appliance (eth1/NIC2):

    A 1-GbE port for general use.

  • Flex Appliance (host0):

    A 1-GbE port copper connector that you can connect to an administrative network to manage the 5340 Appliance system. It is bonded with host1 during initial configuration as bond mgmt0.

eth2/NIC3/privnic1

(copper/RJ45 connector)

  • NetBackup Appliance (eth2/NIC3):

    A 1-GbE port for general use.

  • Flex Appliance (privnic1):

    A 1-GbE Private Low Latency Transport port that is used for connections between the two appliance compute nodes.

eth3/NIC4/privnic0

(copper/RJ45 connector)

  • NetBackup Appliance (eth3/NIC4):

    A 1-GbE port for general use.

  • Flex Appliance (privnic0):

    A 1-GbE Private Low Latency Transport port that is used for connections between the two appliance compute nodes.

IPMI port

(copper/RJ45 connector)

A 1-GbE port that is used for appliance remote management purposes.

eth ports 4 - 13

nic ports 0-9

  • NetBackup Appliance (eth ports 4-13):

    10-GbE ports for general network uses.

  • Flex Appliance (nic ports 0-9):

    10-GbE ports that are used by the application instances.