Veritas NetBackup™ Status Codes Reference Guide
- NetBackup status codes
- NetBackup status codes
- NetBackup KMS status codes
- NetBackup status codes
- Media Manager status codes
- Media Manager status codes
- Media Manager status codes
- Device configuration status codes
- Device configuration status codes
- Device configuration status codes
- Device management status codes
- Device management status codes
- Device management status codes
- Robotic status codes
- Robotic status codes
- Robotic status codes
- Robotic error codes
- Robotic error codes
- Robotic error codes
- Security services status codes
- Security services status codes
- Security services status codes
- NetBackup alert notification status codes
NetBackup status code: 5
Explanation: The following issues can cause this issue:
The vCPU for Azure was consumed past the threshold limit.
When you restore a replicated copy of EC2 instance to an alternate location, the key-pair names must be same on the source and the destination region.
Recommended Action: To correct this issue, try the following solutions as appropriate:
If using Azure, contact your cloud provider to increase the threshold limit.
If you try to restore a replicated copy of EC2, create a new key-pair in the destination region. The new key-pair must be consistent with the key-pair in the source region.
When a VMware agentless restore is performed, the restore can cause one of the following issues:
Failed to upload recovery tool on destination VM %s with error %d.
Make sure there is sufficient space or permissions available at the staging location.
Failed to extract the recovery tool on the destination VM.
Confirm there is sufficient space available at the staging location %s in the target VM.
Click here to view technical notes and other information on the Veritas Technical Support website about this status code.