NetBackup™ Status Codes Reference Guide
- NetBackup status codes
- NetBackup status codes
- NetBackup KMS status codes
- NetBackup status codes
- Media Manager status codes
- Media Manager status codes
- Media Manager status codes
- Device configuration status codes
- Device configuration status codes
- Device configuration status codes
- Device management status codes
- Device management status codes
- Device management status codes
- Robotic status codes
- Robotic status codes
- Robotic status codes
- Robotic error codes
- Robotic error codes
- Robotic error codes
- Security services status codes
- Security services status codes
- Security services status codes
- NetBackup alert notification status codes
NetBackup status code: 8312
Explanation: The backup image that is used for secondary operations such as restore, duplication, import, verify, or others, has DTE mode enabled. However, the DTE setting on media server host is disabled. As a result of this issue, multiple NetBackup operations such as backup, restore, duplication, import, or others fail.
Recommended Action: Perform one of the following as appropriate:
Change the NetBackup configuration to select the media server which supports data-in-transit encryption for performing the NetBackup operations.
The media server that handles the secondary operation needs to have the data-in-transit encryption setting enabled. Change the media server DTE setting of the given media server to on using the following command:
nbseccmd -setsecurityconfig -dtemediamode on -mediaserver <media_server_name>
If the media server that handles the backup needs to have data-in-transit encryption disabled, change the data-in-transit encryption (DTE) mode of the backup image to Off using the following command:
bpimage -update -image_dtemode Off -id <backup_id>
Note:
This option is not applicable for import phase 1.
Set DTE_IGNORE_IMAGE_MODE = ALWAYS in the NetBackup configuration file of the primary server or media server (for import phase 1).
For option 3 and option 4, DTE is disabled while the job is performed.
For more information, refer to the Configuring data-in-transit encryption section in the NetBackup Security and Encryption Guide.
Click here to view technical notes and other information on the Veritas Technical Support website about this status code.