Veritas NetBackup™ Status Codes Reference Guide
- NetBackup status codes
- NetBackup status codes
- NetBackup KMS status codes
- NetBackup status codes
- Media Manager status codes
- Media Manager status codes
- Media Manager status codes
- Device configuration status codes
- Device configuration status codes
- Device configuration status codes
- Device management status codes
- Device management status codes
- Device management status codes
- Robotic status codes
- Robotic status codes
- Robotic status codes
- Robotic error codes
- Robotic error codes
- Robotic error codes
- Security services status codes
- Security services status codes
- Security services status codes
- NetBackup alert notification status codes
NetBackup status code: 53
Explanation: The backup and restore manager (bpbrm) did not read the list of files to back up or restore.
Recommended Action: Verify that the server software was installed correctly on all NetBackup servers. If that is not the problem, do the following:
Create bpbrm debug log directories on the server.
On a UNIX or Linux NetBackup server, add the VERBOSE option to the
bp.conf
file. On a Windows NetBackup server, set the option on the Logging tab in the Master Server Properties dialog box.To display this dialog box, refer to the following topic:
See "Using the Host Properties window to access configuration settings" in the NetBackup Troubleshooting Guide.
Increase the unified logging levels by using the vxlogcfg command as explained in the following procedure:
See "About unified logging" in the NetBackup Logging Reference Guide.
Retry the operation and check the resulting debug logs for detailed troubleshooting information.
Click here to view technical notes and other information on the Veritas Support website about this status code.