Veritas NetBackup™ Status Codes Reference Guide
- NetBackup status codes
- NetBackup status codes
- NetBackup KMS status codes
- NetBackup status codes
- Media Manager status codes
- Media Manager status codes
- Media Manager status codes
- Device configuration status codes
- Device configuration status codes
- Device configuration status codes
- Device management status codes
- Device management status codes
- Device management status codes
- Robotic status codes
- Robotic status codes
- Robotic status codes
- Robotic error codes
- Robotic error codes
- Robotic error codes
- Security services status codes
- Security services status codes
- Security services status codes
- NetBackup alert notification status codes
Media Manager status code 90
Explanation: A request was made to add volumes, change the volume pool for a volume, add a barcode rule, or change a barcode rule. However, the volume pool name or number that is associated with the requested change is in conflict with the requirements for volume pools.
These requirements are as follows:
Volumes in scratch pools cannot be assigned until they are first moved to another pool.
Volume pool numbers cannot be negative.
Volume pool names must consist of from 1 to 20 printable ASCII characters with no embedded whitespace.
The None volume pool is the only valid pool for the barcode rule entries that specify cleaning a media type.
Recommended Action:
Examine the command output, debug logs, and system logs for a more detailed message on the error.
See "Setting Media Manager debug logging to a higher level" in the NetBackup Logging Reference Guide.
Ensure that the specified volume pool does not violate the requirements noted. Use the vmpool command to display the pool information. Use the vmrule command to display the barcode rule information. Add or change the volume pools and barcode rules as needed to rectify inconsistencies in cases where the databases are inconsistent or corrupted.