Veritas NetBackup™ Status Codes Reference Guide
- NetBackup status codes
- NetBackup status codes
- NetBackup KMS status codes
- NetBackup status codes
- Media Manager status codes
- Media Manager status codes
- Media Manager status codes
- Device configuration status codes
- Device configuration status codes
- Device configuration status codes
- Device management status codes
- Device management status codes
- Device management status codes
- Robotic status codes
- Robotic status codes
- Robotic status codes
- Robotic error codes
- Robotic error codes
- Robotic error codes
- Security services status codes
- Security services status codes
- Security services status codes
- NetBackup alert notification status codes
NetBackup status code: 65
Explanation: The tape manager, bptm, reported that the media did not load and position within the allotted time.
Recommended Action: Verify that the requested volume is available and the required device is in an UP state.
Create a bptm debug log directory on the server.
On a UNIX or Linux NetBackup server, add the VERBOSE option to the
bp.conf
file. On a Windows NetBackup server, set the option on the Logging tab in the Master Server Properties dialog box.See "Using the Host Properties window to access configuration settings" in the NetBackup Troubleshooting Guide.
Retry the operation and check the bptm debug log file for information on the drive, robot, and tape that causes the timeout.
On a Windows NetBackup server (master or media): check the Event Viewer Application log for the error messages that indicate why the tape mount did not complete.
Click here to view technical notes and other information on the Veritas Support website about this status code.