Veritas NetBackup™ Appliance SNMP Trap Reference Guide
- Overview
- SNMP hardware traps
- vrtsadapterTrap
- vrtsbbuTrap
- vrtsconnectionTrap
- vrtscpuTrap
- vrtsdiskTrap
- vrtsfanTrap
- vrtsfirmwareTrap
- vrtsnetworkcardTrap
- vrtspartitionTrap
- vrtspowerTrap
- vrtsraidgroupTrap
- vrtsstoragestatusTrap
- vrtssystemName
- vrtstemperatureTrap
- vrtsvolumeTrap
- vrtsenclosurediskTrap
- vrtsenclosurefanTrap
- vrtsenclosurepowerTrap
- vrtsenclosuretemperatureTrap
- vrtsdimmTrap
- vrtsiscsiTrap
- vrtsethernetTrap
- Appendix A. Management Information Base (MIB) file contents
vrtsethernetTrap
OID: 1.3.6.1.4.1.48328.3.9.1.25
The vrtsethernetTrap monitors the 10Gb Ethernet/iSCSI card on the NetBackup appliance for any unsupported Small Form-Factor Pluggable (SFP) modules. If you receive this alert, it means that one or more unsupported SFP modules are inserted in the 10Gb Ethernet/iSCSI card.
Check the SNMP trap or the email alert that you received for additional information to help you determine the exact issue that occurred. Inspect the current SFP's and check if they are manufactured by QLogic. Only QLogic SFP+ modules are supported. Install QLogic SFP+ modules in the 10Gb Ethernet/iSCSI card as needed.
Based on the information from the SNMP trap, the email alert, or after inspecting the physical SFP module, take the following actions:
Table: Next steps for the vrtsethernetTrap
What happened | What to do now |
|---|---|
One or more unsupported SFP modules are inserted in the 10Gb Ethernet/iSCSI card. | Install a supported QLogic SFP+ module in the 10Gb Ethernet/iSCSI card. |