Veritas NetBackup™ Appliance Commands Reference Guide
- Overview
- 付録 A. Main > Appliance commands
- 付録 B. Main > Manage > FibreChannel commands
- 付録 C. Main > Manage > HighAvailability commands
- 付録 D. Main > Manage > Libraries commands
- 付録 E. Main > Manage > Libraries > Advanced > ACS commands
- 付録 F. Main > Manage > License commands
- 付録 G. Main > Manage > MountPoints commands
- 付録 H. Main > Manage > NetBackup CLI commands
- 付録 I. Main > Manage > OpenStorage commands
- 付録 J. Main > Manage > Software commands
- 付録 K. Main > Manage > Storage commands
- 付録 L. Main > Manage > Tapes commands
- 付録 M. Main > Manage > Certificates commands
- 付録 N. Main > Monitor commands
- 付録 O. Main > Network commands
- 付録 P. Main > Network > Security (IPsec) commands
- 付録 Q. Main > Reports commands
- 付録 R. Main > Settings commands
- 付録 S. Main > Settings > Alerts commands
- 付録 T. Main > Settings > Notifications view commands
- 付録 U. Main > Settings > Security commands
- 付録 V. Main > Support commands
名前
Manage > HighAvailability > Setup — Set up an appliance for a high availability (HA) configuration.
概要
Setup NewHostName NewIPAddress
DESCRIPTION
This command configures a node to be an HA node. During this procedure, the host name and the IP address of the node are elevated as the virtual host name and the virtual IP address. Because of the elevation, you need to assign a new host name and a new IP address to the node.
The virtual host name and the virtual IP address work as the floating pointers in the HA configuration. With this mechanism, you can also access the HA with the virtual IP address or the virtual hostname.
メモ:
After you set up the appliance, the HA configuration is partially complete. To complete the HA configuration, perform the initial configuration on the partner node and add it to the HA configuration. Refer to NetBackup Appliance Initial Configuration Guide for more information.
OPTIONS
- Setup NewHostName NewIPAddress
Use this command to configure an appliance to be an HA node.
The mandatory options are as follows:
NewHostName
The hostname of the node after the setup procedure
NewIPAddress
The IP address of the node after the setup procedure