Veritas NetBackup™ Appliance Commands Reference Guide

Last Published:
Product(s): Appliances (3.1 (5340), 3.1 (5330), 3.1 (5240), 3.1 (5230), 3.1 (5220))
  1. Overview
    1.  
      NetBackup Appliance Shell Menuについて
    2. NetBackup Appliance Shell Menuへのログオン
      1.  
        構成されていないアプライアンスに対するコマンドの制限
    3.  
      NetBackup Appliance Shell Menuの使用
    4. NetBackup Appliance Shell Menuコマンドビューについて
      1.  
        [アプライアンス (Appliance)]ビューのコマンドについて
      2.  
        [管理 (Manage)]ビューのコマンドについて
      3.  
        About the commands under the Monitor view
      4.  
        [ネットワーク (Network)]ビューのコマンドについて
      5.  
        [レポート (Reports)]ビューのコマンドについて
      6.  
        [設定 (Settings)]ビューのコマンドについて
      7.  
        [サポート (Support)]ビューのコマンドについて
  2. 付録 A. Main > Appliance commands
    1.  
      Appliance > Master
    2.  
      Appliance > Media
    3.  
      Appliance > Management
    4.  
      Appliance > Remove
    5.  
      Appliance > ShowDedupPassword
    6.  
      Appliance > ShowIdentity
    7.  
      Appliance > Status
  3. 付録 B. Main > Manage > FibreChannel commands
    1.  
      Manage > FibreChannel > Clean
    2.  
      Manage > FibreChannel > Configure
    3.  
      Manage > FibreChannel > Reset
    4.  
      Manage > FibreChannel > Scan
    5.  
      Manage > FibreChannel > Show
    6.  
      Manage > FibreChannel > Statistics
  4. 付録 C. Main > Manage > HighAvailability commands
    1.  
      Manage > HighAvailability > AddNode
    2.  
      Manage > HighAvailability > GetAssetTag
    3.  
      Manage > HighAvailability > RemoveNode
    4.  
      Manage > HighAvailability > Setup
    5.  
      Manage > HighAvailability > Status
    6.  
      Manage > HighAvailability > Switchover
  5. 付録 D. Main > Manage > Libraries commands
    1.  
      Manage > Libraries > Configure
    2.  
      Manage > Libraries > Deny
    3.  
      Manage > Libraries > Down
    4.  
      Manage > Libraries > Inventory
    5.  
      Manage > Libraries > List
    6.  
      Manage > Libraries > Requests
    7.  
      Manage > Libraries > Reset
    8.  
      Manage > Libraries > Resubmit
    9.  
      Manage > Libraries > Up
  6. 付録 E. Main > Manage > Libraries > Advanced > ACS commands
    1.  
      Manage > Libraries > Advanced > ACS > ACS_CSI_HOSTPORT
    2.  
      Manage > Libraries > Advanced > ACS > ACS_SEL_SOCKET
    3.  
      Manage > Libraries > Advanced > ACS > ACS_SSI_HOSTNAME
    4.  
      Manage > Libraries > Advanced > ACS > ACS_SSI_INET_PORT
    5.  
      Manage > Libraries > Advanced > ACS > ACS_SSI_SOCKET
    6.  
      Manage > Libraries > Advanced > ACS > ACS_TCP_RPCSERVICE
    7.  
      Manage > Libraries > Advanced > ACS > ACS_UDP_RPCSERVICE
    8.  
      Manage > Libraries > Advanced > ACS > API_BARCODE_RULES
    9.  
      Manage > Libraries > Advanced > ACS > TestACS
    10.  
      Manage > Libraries > Advanced > ACS > ViewVMconf
  7. 付録 F. Main > Manage > License commands
    1.  
      Manage > License > Add
    2.  
      Manage > License > List
    3.  
      Manage > License > ListInfo
    4.  
      Manage > License > Remove
  8. 付録 G. Main > Manage > MountPoints commands
    1.  
      Manage > MountPoints > List
    2.  
      Manage > MountPoints > Mount
    3.  
      Manage > MountPoints > Unmount
  9. 付録 H. Main > Manage > NetBackup CLI commands
    1.  
      Manage > NetBackupCLI > Create
    2.  
      Manage > NetBackupCLI > Delete
    3.  
      Manage > NetBackupCLI > List
    4.  
      Manage > NetBackupCLI > PasswordExpiry
  10. 付録 I. Main > Manage > OpenStorage commands
    1.  
      Manage > OpenStorage > Install
    2.  
      Manage > OpenStorage > List
    3.  
      Manage > OpenStorage > Readme
    4.  
      Manage > OpenStorage > Share
    5.  
      Manage > OpenStorage > Uninstall
  11. 付録 J. Main > Manage > Software commands
    1.  
      Manage > Software > Cancel
    2.  
      Manage > Software > Delete
    3.  
      Manage > Software > Download
    4.  
      Manage > Software > DownloadProgress
    5.  
      Manage > Software > Firmware
    6.  
      Manage > Software > Install
    7.  
      Manage > Software > List
    8.  
      Manage > Software > LiveUpdateClients
    9.  
      Manage > Software > Readme
    10.  
      Manage > Software > Rollback
    11.  
      Manage > Software > Share
    12.  
      Manage > Software > UpgradeStatus
  12. 付録 K. Main > Manage > Storage commands
    1.  
      Manage > Storage > Add
    2.  
      Manage > Storage > Create
    3.  
      Manage > Storage > Delete
    4.  
      Manage > Storage > Edit
    5.  
      Manage > Storage > Monitor
    6.  
      Manage > Storage > Move
    7.  
      Manage > Storage > Remove
    8.  
      Manage > Storage > Resize
    9.  
      Manage > Storage > Scan
    10.  
      Manage > Storage > Show
    11.  
      Manage > Storage > Erase
  13. 付録 L. Main > Manage > Tapes commands
    1.  
      Manage > Tapes > Cleaning
    2.  
      Manage > Tapes > Delete
    3.  
      Manage > Tapes > Eject
    4.  
      Manage > Tapes > Freeze
    5.  
      Manage > Tapes > Inventory
    6.  
      Manage > Tapes > List
    7.  
      Manage > Tapes > ListNetBackupMedia
    8.  
      Manage > Tapes > Suspend
    9.  
      Manage > Tapes > Unfreeze
    10.  
      Manage > Tapes > Unsuspend
  14. 付録 M. Main > Manage > Certificates commands
    1.  
      Manage > Certificates > Generate
    2.  
      Manage > Certificates > Delete
  15. 付録 N. Main > Monitor commands
    1.  
      Monitor > Beacon
    2.  
      Monitor > MemoryStatus
    3.  
      Monitor > NetBackup
    4.  
      Monitor > NetworkStatus
    5.  
      [監視 (Monitor)]>[SDCS]
    6.  
      Monitor > Top
    7.  
      Monitor > Uptime
    8.  
      Monitor > Who
    9.  
      Monitor > Hardware
  16. 付録 O. Main > Network commands
    1.  
      Network > Configure
    2.  
      Network > Date
    3.  
      Network > DNS
    4.  
      Network > Gateway
    5.  
      Network > Hostname
    6.  
      Network > Hosts
    7.  
      Network > IPv4
    8.  
      Network > IPv6
    9.  
      Network > LinkAggregation
    10.  
      Network > NetStat
    11.  
      Network > NTPServer
    12.  
      Network > Ping
    13.  
      Network > SetProperty
    14.  
      Network > Show
    15.  
      Network > TimeZone
    16.  
      Network > TraceRoute
    17.  
      Network > Unconfigure
    18.  
      Network > VLAN
    19.  
      Network > WANOptimization
  17. 付録 P. Main > Network > Security (IPsec) commands
    1.  
      Network > IPsec > Configure
    2.  
      Network > IPsec > Delete
    3.  
      Network > IPsec > Export
    4.  
      Network > IPsec > Import
    5.  
      Network > IPsec > Provision
    6.  
      Network > IPsec > Refresh
    7.  
      Network > IPsec > Show
    8.  
      Network > IPsec > Unconfigure
  18. 付録 Q. Main > Reports commands
    1.  
      Reports > Deduplication
    2.  
      Reports > Process
  19. 付録 R. Main > Settings commands
    1.  
      Settings > Cloud
    2.  
      Settings > Deduplication
    3.  
      Settings > FibreTransport
    4.  
      Settings > iSCSI > Initiator
    5.  
      Settings > iSCSI > Interface
    6.  
      Settings > iSCSI > Target
    7.  
      Settings > LogForwarding
    8.  
      Settings > LifeCycle
    9.  
      Settings > LiveUpdateServer
    10.  
      Settings > NetBackup
    11.  
      [設定 (Settings)]>[パスワード (Password)]
    12.  
      Settings > Share
    13.  
      Settings > SNMP polling
    14.  
      Settings > Sysctl
    15.  
      Settings > SystemLocale
  20. 付録 S. Main > Settings > Alerts commands
    1.  
      Settings > Alerts > CallHome
    2.  
      Settings > Alerts > Email
    3.  
      Settings > Alerts > Hardware
    4.  
      Settings > Alerts > SNMP
  21. 付録 T. Main > Settings > Notifications view commands
    1.  
      Settings > Notifications > LoginBanner
  22. 付録 U. Main > Settings > Security commands
    1.  
      Settings > Security > Authorization
    2.  
      Settings > Security > Authentication > ActiveDirectory
    3.  
      Settings > Security > Authentication > Kerberos
    4.  
      Settings > Security > Authentication > LDAP
    5.  
      Settings > Security > Authentication > LocalUser
    6.  
      Settings > Security > STIG
  23. 付録 V. Main > Support commands
    1.  
      Support > Checkpoint
    2.  
      Support > Cleanup > RemoveShelfEntries
    3.  
      Support > Cleanup > ResetDIMMErrors
    4.  
      Support > Collect
    5.  
      Support > DataCollect
    6.  
      Support > Disk
    7.  
      Support > Errors
    8.  
      Support > FactoryReset
    9.  
      Support > FibreTransport
    10.  
      Support > InfraServices
    11.  
      Support > iostat
    12.  
      Support > IPMI
    13.  
      Support > KillRemoteCall
    14.  
      Support > Logs
    15.  
      Support > Maintenance
    16.  
      Support > Messages
    17.  
      Support > NBDNA
    18.  
      Support > nbperfchk
    19.  
      Support > NBSU
    20.  
      Support > Processes
    21.  
      Support > RAID
    22.  
      Support > Reboot
    23.  
      Support > RecoverStorage
    24.  
      Support > Service
    25.  
      Support > ServiceAllowed
    26.  
      Support > Show
    27.  
      Support > Shutdown
    28.  
      Support > Storage ClearReservations
    29.  
      Support > Storage Reset
    30.  
      Support > Storage SanityCheck
    31.  
      Support > Test

名前

Main > Support > FactoryReset — 出荷時のデフォルト設定にアプライアンスをリセットします。

概要

FactoryReset

FactoryReset ResetAll

説明

このコマンドは Main_Menu > Support ビューの下にあります。このコマンドを使って出荷時のデフォルト設定にアプライアンスをリセットできます。初期パスワードを別のパスワードに変更する場合にこのコマンドを実行すると、パスワードが初期デフォルト値にリセットされます。

???を参照してください。

メモ:

このコマンドを使用して、高可用性構成から削除するノードをリセットする前に、次の手順を実行する必要があります。

削除したノードからイーサネットケーブルを取り外します。

削除したノードからファイバーチャネルケーブルを取り外します。

オプション

FactoryReset

このコマンドを使って出荷時のデフォルト設定にアプライアンスをリセットします。

FactoryReset ResetAll

このコマンドを使って非対話モードでアプライアンスの出荷時にインストールされたイメージにリセットします。

アプライアンスのシェルメニューから出荷時設定へのリセットを開始するには

  1. 管理者として SSH セッションを開いてアプライアンスにログオンします。
  2. Main_Menu > Support > FactoryReset と入力します。このコマンドを使うと次のメッセージが表示され、出荷時設定へのリセットを開始する前に以下の質問に答えるよう要求されます。
    Appliance factory reset will reset the entire system to the factory 
    installed image. The appliance will have the following components
    reset to the factory restored settings/image:
    1) Appliance Operating System
    2) Appliance Software
    3) NetBackup Software
    4) Tape media configuration on the master server
    5) Networking configuration
    6) Storage configuration and backup data (optionally retain)
    
    - [Info] Running factory reset validation...please wait (approx 2 mins)
    - [Info] Factory reset validation successful.
    
    RESET NETWORK CONFIGURATION [Optional]
            -- Resets the IP and routing configuration.
            -- Resets the DNS configuration.
     >> Do you want to reset the network configuration? [yes/no] (yes) no
    
    RESET STORAGE CONFIGURATION and BACKUP DATA [Optional]
            -- Removes all the images on the AdvancedDisk and MSDP storage pools.
            -- Resets the storage partitions.
            -- Resets storage expansion units, if any.
     >> Do you want to delete images and reset backup data? [yes/no] (yes)
     >> Resetting the storage configuration will remove all backup
        data on the storage partitions and any connected expansion
        units. This is not reversible. Are you sure you want to
        reset storage configuration? [yes/no] (yes)
     >> A reboot of the appliance is required to complete the factory reset. 
        Reboot automatically after reset? [yes/no] (no) yes
     >> Automatically rebooting after the reset will not provide you with an
        opportunity to review the progress/final status of the reset. Are you sure
        you would like to automatically reboot? [yes/no] (no) yes
  3. これらの質問に答えると、次の概略情報が表示されます。
    FACTORY RESET SUMMARY
    ---------------------
    Reset Appliance OS, software configuration          : [YES]
    Reset Appliance network configuration               : [NO]
    Reset Appliance storage configuration (REMOVE DATA) : [YES]
    Auto reboot after reset?                            : [YES]
    
    Appliance will make the following version changes:
    
    +------------------------------------------------------------------------------+
    | Appliance  |        Current Version         |        Reverted Version        |
    |------------+--------------------------------+--------------------------------|
    |v49         |NetBackup 7.6.0.1 Appliance     |NetBackup 7.6.0.1 Appliance     |
    |            |2.6.0.1                         |2.6.0.1                         |
    +------------------------------------------------------------------------------+
  4. 次の警告が表示されます。出荷時設定へのリセット操作を開始する場合は、Yes と入力します。
    WARNING: an Appliance Factory reset cannot be reversed!
    Continue with factory reset? yes

    出荷時設定へのリセットが進むにつれて以下の概略メッセージが表示されます。

    - [Info] PERFORMING APPLIANCE RESET TO FACTORY STATE ON : abc123.example.com
    - [Info] Delete checkpoints (type: NON_FACT) succeeded
    - [Info] Reset of the appliance to FACTORY STATE successful.
    - [Info] Stopping NetBackup processes... (6 mins approx)
    - [Info] Moving NetBackup Appliance Directory to ce-win21-urmi1...
    - [Info] Acquired lock on the storage.
    - [Info] Resetting the storage configuration...
    - [Info] Checking whether the 'MSDP' storage partition exists...
    - [Info] Initiating deletion of 'MSDP' storage partition...
    - [Info] Unmounting the 'MSDP' partition '0'...
    - [Info] Deleting the 'MSDP' partition '0'...
    - [Info] Checking whether the 'Catalog' storage partition exists...
    - [Info] Initiating deletion of 'Catalog' storage partition...
    - [Info] Unmounting the 'Catalog' partition '0'...
    - [Info] Deleting the 'Catalog' partition '0'...
    - [Info] Checking whether the 'Configuration' storage partition exists...
    - [Info] Initiating deletion of 'Configuration' storage partition...
    - [Info] Unmounting the 'Configuration' partition '0'...
    - [Info] Deleting the 'Configuration' partition '0'...
    - [Info] Checking whether the 'AdvancedDisk' storage partition exists...
    - [Info] Initiating deletion of 'AdvancedDisk' storage partition...
    - [Info] Unmounting the 'AdvancedDisk' partition '0'...
    - [Info] Deleting the 'AdvancedDisk' partition '0'...
    - [Info] Removing the storage configuration...
    - [Warning] Failed to query SCSI device '/dev/system/root'.
    
    - [Warning] Failed to query SCSI device '/dev/system/root'.
     >> A reboot of the appliance is required to complete the factory reset.
        Reboot now?[yes/no] (no)yes
    Rebooting the appliance now...
    - [Info] Rebooting abc123.example.com...
    
    Broadcast message from root (Mon Nov 25 11:56:39 2013):
    
    The system is going down for reboot NOW!
    - [Info] Rebooting appliance to complete the reset.
      Please reconnect to the Appliance shell menu to continue using this appliance