Veritas NetBackup™ Appliance Commands Reference Guide
- Overview
- 付録 A. Main > Appliance commands
- 付録 B. Main > Manage > FibreChannel commands
- 付録 C. Main > Manage > HighAvailability commands
- 付録 D. Main > Manage > Libraries commands
- 付録 E. Main > Manage > Libraries > Advanced > ACS commands
- 付録 F. Main > Manage > License commands
- 付録 G. Main > Manage > MountPoints commands
- 付録 H. Main > Manage > NetBackup CLI commands
- 付録 I. Main > Manage > OpenStorage commands
- 付録 J. Main > Manage > Software commands
- 付録 K. Main > Manage > Storage commands
- 付録 L. Main > Manage > Tapes commands
- 付録 M. Main > Manage > Certificates commands
- 付録 N. Main > Monitor commands
- 付録 O. Main > Network commands
- 付録 P. Main > Network > Security (IPsec) commands
- 付録 Q. Main > Reports commands
- 付録 R. Main > Settings commands
- 付録 S. Main > Settings > Alerts commands
- 付録 T. Main > Settings > Notifications view commands
- 付録 U. Main > Settings > Security commands
- 付録 V. Main > Support commands
名前
Manage > HighAvailability > Switchover — Switch the services between the two nodes in a high availability (HA) configuration.
概要
Switchover hostname
DESCRIPTION
This command switches the services from one node to the target node in an HA configuration. Use this command for a planned upgrade or maintenance, because such operations need to be performed on the node where the MSDP service is not running.
メモ:
You cannot perform this operation with the virtual hostname or virtual IP address. You need to use the physical hostname or physical IP address.
The MSDP-related backup and restore jobs are terminated during the switchover. Make sure that no such jobs are running before the switchover.
OPTIONS
Switchover hostname
Use this command to switch the services from one node to the target node. The hostname is the hostname of the target node.