Veritas NetBackup™ Status Codes Reference Guide
- NetBackup status codes
- NetBackup status codes
- NetBackup KMS status codes
- NetBackup status codes
- Media Manager status codes
- Media Manager status codes
- Media Manager status codes
- Device configuration status codes
- Device configuration status codes
- Device configuration status codes
- Device management status codes
- Device management status codes
- Device management status codes
- Robotic status codes
- Robotic status codes
- Robotic status codes
- Robotic error codes
- Robotic error codes
- Robotic error codes
- Security services status codes
- Security services status codes
- Security services status codes
- NetBackup alert notification status codes
Media Manager status code 2
Explanation: A system call failed. This status code is used for a generic system call failure that does not have its own status code.
Recommended Action:
Check for other error messages in the command or the interface output to determine which system call failed.
Check the system application log for error and warning messages.
Verify that the system is not running out of virtual memory. If virtual memory is the problem, shut down unused applications or increase the amount of virtual memory.
To increase virtual memory on Windows, do the following in the order presented:
Display the Control Panel.
Double-click System.
On the Performance tab, set Virtual Memory to a higher value.
Verify that all of the product binaries are properly installed.
Verify that no unexpected media and device management processes are in operation by running vmps. Some processes are expected to continue running. Others that continue to run can indicate a more serious problem, such as a hung system call.