Please enter search query.
Search <book_title>...
Veritas NetBackup™ Status Codes Reference Guide
Last Published:
2018-09-19
Product(s):
NetBackup (8.1.2)
- NetBackup status codes
- NetBackup status codes
- NetBackup KMS status codes
- NetBackup status codes
- Media Manager status codes
- Media Manager status codes
- Media Manager status codes
- Device configuration status codes
- Device configuration status codes
- Device configuration status codes
- Device management status codes
- Device management status codes
- Device management status codes
- Robotic status codes
- Robotic status codes
- Robotic status codes
- Robotic error codes
- Robotic error codes
- Robotic error codes
- Security services status codes
- Security services status codes
- Security services status codes
- NetBackup alert notification status codes
Device configuration status code 7
Explanation: A request was made to add or change the SCSI port number for a robot, but the SCSI port number provided was not valid.
Recommended Action:
Examine the command output, debug logs, and system logs for a more detailed message on the error.
See "Setting Media Manager debug logging to a higher level" in the NetBackup Logging Reference Guide.
Specify the correct SCSI port number for the robot. Perform device discovery by using the Device Configuration Wizard, or check the Windows registry as needed to obtain the SCSI port number.