Veritas NetBackup™ Status Codes Reference Guide
- NetBackup status codes
- NetBackup status codes
- NetBackup KMS status codes
- NetBackup status codes
- Media Manager status codes
- Media Manager status codes
- Media Manager status codes
- Device configuration status codes
- Device configuration status codes
- Device configuration status codes
- Device management status codes
- Device management status codes
- Device management status codes
- Robotic status codes
- Robotic status codes
- Robotic status codes
- Robotic error codes
- Robotic error codes
- Robotic error codes
- Security services status codes
- Security services status codes
- Security services status codes
- NetBackup alert notification status codes
Media Manager status code 9
Explanation: A process that performed a media-related operation encountered an unknown, missing, or incompatible media type specifier.
Recommended Action:
If you run a robot inventory on a robot of type ACS, TLH, or TLM, ensure that the installed version of NetBackup supports and recognizes the vendor media type that the robot control software returns.
If using a command-line interface directly, verify that a valid media type has been passed, according to vmadd(1m) command-line documentation.
Ensure that an operation valid only for cleaning media has not been requested on a media ID that does not correspond to the cleaning tape.
Ensure that the media type in all barcode rules is a valid media type or the ordinal zero (0), to represent the default media type.